bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Boat Covers


  • What Boat Cover Fits My 16-Foot 1988 Campion 165 Fishing Machine with 70-Inch Beam Width?
  • Yes! For a great cover for your 1988 Campion 165 Fishing Machine, I recommend the Classic Accessories DryGuard Waterproof Boat Cover - 14' to 16' Long # CA20083. Not only is this cover completely waterproof, it comes with 2 rear air vents to prevent lofting and billowing during transport. Another bonus is that it comes with a 5-year warranty. This cover is designed to fit your 16-foot boat with a beam with of 70 inches wide.
    view full answer...

  • Recommended Boat Cover For 16 Foot Lund Rebel SS Boat and 40 HP Outboard Motor
  • You will need to determine the beam width of your 16 foot Lund Rebel SS Boat, for the proper fit of a cover. A boat cover I would recommend that is good for outdoor storage is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. The StormPro covers will repel water, but are not waterproof. You will want to measure your beam width to determine if this cover will work. If your beam width...
    view full answer...

  • Recommended Boat Cover for a 18' x 98" V-Hull Boat
  • As long as your boat's beam (width of the widest point) does not exceed the 98 inches, the Classic Accessories DryGuard Boat Cover for 98" Beam # CA20085, it will fit your boat. I would not recommend choosing the larger size as boat covers are meant to fit snug to act as a seal to protect your boat. However, if your boat beam is a little larger than 98" I would recommend the Classic Accessories DryGuard Waterproof Boat Cover for a 102" Beam # CA20086. This cover will provide the best...
    view full answer...

  • Fitment Of Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 On 12' Boat
  • The Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 is designed to fit snuggly on a 12'-14' v-hull boat. The width of the boat should not exceed 68" at the widest point. You want the cover to fit snug so that any wind that hits the boat will not allow the cover to move and possibly chafe, creating wear or damage to the cover. For the outboard motor I recommend finding a cover that will encase the entire outboard. This will help prevent any critters from building nests...
    view full answer...

  • Difference Between Classic Accessories Boat Covers 052963889383 and CA20085
  • The main difference between the two covers that you mentioned is the application for the two. The Classic Accessories DryGuard Waterproof Boat Cover # CA20085 is designed for bass and fishing boats whereas the Classic Accessories Boat Cover # 052963889383 is for a V-Hull boat. Depending on which style of boat you have would dictate which cover would be best.
    view full answer...

  • Economically Priced Boat Cover Recommendation for 14 Foot Boat
  • For a great priced boat cover for a 14 foot boat the part # 052963889185 would be a great option. It's designed to fit 14-16 feet boats like yours and would work well.
    view full answer...

  • Can the Cover for a 20 Foot Long Pontoon Boat Be Used While the Boat Is Moored
  • I do have an option for you but all of our boat trailer covers are designed to be used with a boat on a trailer or in storage. That said, if you are able to find a way to secure the straps for the cover to the boat while in the water then I do not see any other reason as to why they would not work in this application as well. In order to make sure we get you the correct cover I would need to know the widest point of your pontoon boat. If it does not exceed 96" then you can use the Classic...
    view full answer...

  • Will Classic Accessories Boat Cover Fit on Boat Without a Windshield?
  • The Classic Accessories Boat Cover by StormPro # 052963889185 fits 14 -16 foot boats with a beam width up to 75 inches. Since your boat meets those dimensions, the fact that it does not have a windshield is not going to affect how the cover fits. It features an integrated buckle and adjustable strap system as well as an adjustable elastic cord at the bottom of the cover to ensure a tight fit over your boat.
    view full answer...

  • What Color is StormPro Boat Cover 052963889383?
  • The boat cover is grey and fits boats up to 18.5 feet long and 98 inches wide. This cover fits fish and ski boats as well as pro-style bass boats within those dimensions.
    view full answer...

  • Will the Taylor Made BoatGuard Eclipse V-Hull Bay Boat Cover Fit a 22' Boat with a 96" Beam
  • Yes, the Taylor Made BoatGuard Eclipse V-Hull Bay Boat Cover # 36970914 will fit your 22' V-Hull boat with 96" beam. This cover will fit boats between 20' - 22' and beams up to 102" (maximum width), so it will still work for your 96" beam. It is designed to be trailable and has elastic cords to help keep the cover tight.
    view full answer...

  • Does Classic Accessories Boat Cover Fit Over Boat Motor
  • The Classic Accessories Boat Cover, part # 052963889383 is designed to fit tight around the boat but does not fit around the motor. There are so many motors available it would be tough to make a cover that would fit over the motor and provide a tight fit. We do not offer boat motor covers.
    view full answer...

  • Classic Accessories Boat Cover Fit Information for a 2002 Fourwinns Horizon 180 Boat
  • To determine if this Classic Accessories Boat Cover # 052963889482 will fit on your 2002 Fourwinns Horizon 180 you will need to take some measurements of your boat. This cover is designed to fit boats that are 17 to 19 feet in length and boats with beam widths up to 102 inches. If you measure the length and width of your boat and it fits in those measurements this cover should work for you. If not, email me back with the measurements of your boat and I can hopefully find one that does fit.
    view full answer...

  • Boat Cover Recommendation for a 1987 Stratos 179V Bass Boat
  • The covers like the Classic Accessories Hurricane Fishing Boat Cover # 052963889383 will work on bass boats like yours, but you will need to consider your trolling motor when you install the cover. You would either want to remove the trolling motor before you install the cover or come up with a way to protect the cover from the blades of it. Some people will use an old deflated basketball to place over the blades of the motor before you install the cover. From the research I did it looks...
    view full answer...

  • Will the Eclipse Boat Cover # 36970911 Fit My 16-Foot 98 Champion 165 Fishing Boat?
  • Yes. You can definitely use the Taylor Made Eclipse Center Console Boat Cover - 17' to 19' Long Boats - 96" Beam # 36970911 on your 16-foot 98 Champion 165 with a center console instead of the # 36970211. However, you may have a bit of extra overhang that can be easily adjusted for a tight fit. The main difference between the covers is that the # 36970911 is a vented design while the # 36970211 does not include vents that prevent billowing. The # 36970911 also comes with 600-Denier reflective...
    view full answer...

  • Boat Cover for a 14 Foot Long and 96 Inch Wide Boat with Cuddy Cabin and 15 Inch Bow Rails
  • Your boat at 19 feet and 96 inch beam length is within the tolerances of the Classic Accessories Boat Cover, # 052963889581. As far as width, it fits up to 106 inch wide boats. the extra foot of length should not be a hindrance either. A similar cover that fits 17 to 19 foot boats and beam widths up to 102 inches is # 052963889482. This would be a tighter fit to your boat. I think the bow rails and the cuddy cabin would necessitate the larger cover though.
    view full answer...

  • Recommended Cover for 16-1/2 Foot Boat with Trolling Motor
  • The Classic Accessories Boat Cover # 052963889284 referenced in your question is designed to fit boats that are between 14 and 16 feet long. Since your boat measures a bit longer than 16 feet, I recommend going up in length with the Classic Accessories # 052963889383. This is the same style cover as what you were looking at but it fits boats that are between 16 and 18-1/2 feet long. This will likely provide a better fit for your boat and can also work with wider boats with a beam width...
    view full answer...

  • Trailerable Boat Cover for 22 Foot Suntracker Party Barge
  • I do have a solution for you but the cover you referenced Taylor Made Eclipse Pontoon Boat Cover item # 36970912 is not for trailering. I recommend the Classic Accessories StormPro Pontoon Boat Cover item # CA20028, this cover is rated for both storing and hauling your 2015 Suntracker Party Barge 22foot DLX. The cover fits boats from 21' - 24' long and 96" wide at the widest point of boat.
    view full answer...

  • Availability of Cover for 16 Foot Lund DLX Boat
  • You can measure the exact beam width of your 16 foot Lund DLX Boat to determine the proper fit of a cover. For example, the Lund 1648T jon boat is 15-feet 10-inches long and has a beam width of 70-inches. The boat cover I recommend is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. If your beam width is more than 90 inches, you will need part # 052963889383.
    view full answer...

  • Will Classic Accessories Boat Cover 052963889482 for 17 to 19 foot boats fit a 2004 Hurricane 187
  • I just spoke with my contact at the manufacturer and he said that this Classic Accessories cover, part # 052963889482 will indeed fit your 2004 Hurricane 187. For an outboard motor cover I attached a page that shows all of the different covers we offer. You will need to know the size and horsepower rating of the motor to select the right cover.
    view full answer...

  • Boat Cover Recommendation for 2002 Four Winns 180 Horizon that is Waterproof
  • It really depends on what kind of cover you are mentioning. If the cover is one like the part # 052963889482 that covers everything you would not want to use it at the same time as this cover. If its a smaller cover that maybe only covers a couple sections of the boat then you could use it at the same time. This cover is considered water resistant but is not waterproof. If that feature is important to you the DryGuard # CA20085 will be the better choice as it is totally waterproof but...
    view full answer...